*Sizes displayed as made-to-order will be shipped about two months after the order is confirmed. Upper: Kip (calf leather), Sole: Rubber (with shank)
made in Japan
Color: Black/Red
IDEA
"negroni", which brings together the best of technology to achieve a slender and elegant form and the ultimate in comfort.
The design is designed to look slim, but when you put your feet in it doesn't feel cramped.
The flowing design like a sports car is impressive, and the three-dimensional "n" mark and color-coordinated stitching tighten the whole.
Overall, it has a sporty appearance, but it also has an elegant atmosphere at its core, and it fits well with a slightly sharp look like a jacket style.
The Italian rubber sole has a rolled-up heel that prevents the shoes from being damaged when operated by the pedals and allows for smooth movement.
In addition, it is not only used as driving shoes, but also has a highly cushioned sole, durability, and functionality, so it can be used as a luxurious walking shoe.
The cushioning material is built into the entire interior, so when you put your feet in, you will be surprised in a good way by the soft and enveloping feeling.
In addition, the insole for IDEA is made of an anti-static material called "Callock Stuffer" that has a photocatalytic reaction (when exposed to ultraviolet light or fluorescent light, a photocatalytic reaction occurs, and organic matter such as the source of odors attached to it is decomposed. (Materials with added functions of active titanium oxide that can obtain antibacterial and deodorant effects) processing, orderless (decomposes and suppresses generation of ammonia and fatty acids, and has antibacterial, deodorizing, deodorizing, and antifungal effects) processing In addition, the toe part is made of high-resilience material, and the heel part is made of low-resilience shock-absorbing material. It is made.
The same material as the insole is used for the entire lining, and it is designed to achieve a higher effect.
> *Because we use natural leather, there may be small scratches or uneven color, but please note that this is a characteristic of the material.
* Please refer to the bottom of this page for size guides.
★ "Negroni" is amazing! ◆ Original kip (1 year old calf leather) leather with an average thickness of 1.6mm is used for the upper. (Excluding some models)
If you have a ruler or measure nearby, please check the thickness of "1.6mm". I think you can imagine that it is quite solid and thick.
The thicker the leather, the harder it often feels, but the custom-tanned "Negroni leather" does not feel stiff, and the natural grain (unevenness) gives it a beautiful surface feel and a smooth feel to the fingers. I think that the texture that sticks to you will surely satisfy your sense of ownership.
◆ It's not just the driving scene! They are also shoes for walking.
Used by professional racing drivers, "Negroni" = "driving shoes", so it seems that the image of driving shoes is strong, but in fact, it has sufficient cushioning, a wooden shape that does not constrict the toes, and a good burr. It is also a "shoe for walking hard" that combines (flexible flexibility, bending and returning).
The reason lies in the construction of the shoe.
Surprisingly, counting from the bottom to the upper, it has an 8-layer structure.
A typical leather sneaker is probably about 4 layers, or 6 layers at most, so you can see the unusual elaborateness.
I will introduce in order from the sole
① Rubber sole made by Gomusu in Italy (excluding some models)
(2) Fiber sheet (stiffness is ensured by compressing paper from the arch to the heel). Attach the shank (middle bone) here
③ Leather board (leather powder hardened with rubber, secret of good return)
④ Three-dimensional truss mesh (creates a layer and flow of air in the toe area, making it less stuffy in the summer and warmer in the winter)
⑤ Molding latex (arch cushion that supports the arch part with a surface)
⑥ Lining (optical fiber mesh, etc.)
⑦ Brushed urethane (with cushion foam on the entire inside to make the foot feel softer)
⑧ Upper leather (Negroni leather)
The moment you put it on, it feels like you're covered in another durable thick skin, yet it's comfortable to wear.
Technology and ingenuity are also applied to prevent thick = hot.
◆ Sophisticated design that fits well not only on holidays but also in the business scene
Basically, it is a casual sneaker type, but the design sense that is reminiscent of the beautiful Italian cocktail, which is the origin of the name, has an elegant atmosphere at the bottom, and it can be worn with a jacket style. Also, there is no sense of incongruity, rather than perfect.
It is sure to come in handy not only for everyday use, but also for various occasions such as business trips, outdoor activities, and travel.
◆ Uses wooden molds that are thoroughly modeled after Japanese foot shapes
Recently, the foot shape of Japanese people is becoming westernized, and the number of people with thin and thin foot shape is increasing.
When wearing slim and smartly designed sneakers, you may often choose a display size that is larger than the actual size of your foot, but "Negroni" is different. We thoroughly studied the average foot shape of Japanese people (you can guess the stiffness from the structure above), and created a unique shoe tree that looks stress-free and neat.
Therefore , if you choose the same size as your regular sneakers, it will definitely be "large".
◎ Approximate best size
* On a white paper, draw a “T”-shaped line with vertical and horizontal lines intersecting at right angles.
* Place the paper along the wall of the hard floor with the horizontal bar of the "T" folded over and the horizontal bar against the wall.
* With the socks you will be using on top of the paper, relax and stand up straight.
* Align the deepest point on the heel with the part (wall) where the "T" crosses.
* Stand so that the tip of your toe (thumb, index finger, or middle finger) is in the middle of the extending line of the "T".
* Draw a horizontal line on the tip of the toe with a pencil or pen.
* Use a ruler to measure the straight line distance between the intersection of the "T"s (the bent portion) and the mark.
* The numerical value becomes "Sokucho".
In the case of Negroni, foot length ≒ Negroni size is almost correct.
Actually, it depends on the width of the foot, the height of the instep, the shape of the fingers, and your preference, so it's just a guideline.
Foot length: Negroni (IDEA) size
26.7 cm or more and less than 27.2 cm: 27.0 cm
26.2 cm or more and less than 26.7 cm: 26.5 cm
25.7 cm or more and less than 26.2 cm: 26.0 cm
25.2 cm or more and less than 25.7 cm: 25.5 cm
24.7 cm or more and less than 25.2 cm: 25.0 cm
24.2 cm or more and less than 24.7 cm: 24.5 cm
23.7 cm or more and less than 24.2 cm: 24.0 cm
If you choose , I think it's probably the right size. You don't need to calculate the discard size.
◆ Even though they are sneakers, they are not disposable!
In general, sneakers are not made on the assumption that the sole will be replaced, unlike dress shoes with the Goodyear welted manufacturing method, so once the sole wears out, it will be difficult to repair and you will not be able to wear it anymore. .
But Negroni is different. We accept sole repair.
It takes time (depending on factory conditions) and actual cost to go through the process of peeling off the sole and reapplying a new sole, but being able to recycle shoes that are familiar with your feet is very eco-friendly and valuable. I think that's the thing.
At the beginning of the transaction, I was very moved by the words from the former president, "We will take responsibility for the product that we put out by ourselves until the end."
◆ Sole exchange [In order to reduce the customer's cost burden, it has been changed to accept directly from the manufacturer. ]
If the upper leather is not torn, the sole can be replaced at least once. Only all sole exchange is accepted.
The repair period is about one month. We also accept sole exchanges for our original products at the manufacturer.
◆ Available payment methods
・Credit card: Visa, Mastercard, AMEX, JCB, Discover, Diners Club cards (lump-sum payment only)
For deliveries outside Japan.
Delivery by traceable EMS within 2 working days of order confirmation. (Closed on Tuesdays Japan time).
Shipping costs.
China (excluding Hong Kong and Macau), South Korea and Taiwan: JPY 2,200.
Indonesia, Cambodia, Singapore, Thailand, Philippines, Vietnam, Hong Kong, Macau, Malaysia, Mongolia: JPY 3,150.
United States of America, Canada, Mexico: JPY6,000.
Direct delivery to countries and regions other than those listed above is currently not available.
Delivery times
Delivery is generally expected within 7 days of dispatch, depending on transport congestion and weather factors.
Taxes
Consumption tax in Japan is exempted, but the consignee (customer) is responsible for any customs duties and consumption taxes imposed depending on the transport area.
Accidents and loss during transport
The Company, as the sender, is responsible for any damage or loss during transport. In the unlikely event of damage or loss during transit, we will either send a replacement or provide a full refund.
Returns and exchanges
Defective goods, wrong delivery, etc.: We take all possible care in the management and delivery of our products, but in the unlikely event of damage or defacement, please notify us by e-mail or other means within 7 days of receipt of the goods. We will immediately deliver a replacement or issue a refund. (Shipping and handling charges will be borne by the company).
The same applies in the unlikely event of a discrepancy between the item ordered and the item delivered.
In the event of a return or exchange due to the customer's reasons (e.g. preference, size change, etc.): The customer is responsible for all return and exchange shipping costs and actual payment charges.
All shoes sold in the shop are laced and inspected upon arrival before shipping. There are no products that are not laced.
We take great care to reproduce colours, but they may vary depending on the monitor or environment you are viewing them on. We ask for your understanding in the case of subtle differences in colour.
The shoes are manufactured by hand, so minute splashes of adhesive cannot be avoided in the manufacturing process.
In the case of products using natural leather, they are processed from natural materials that have actually been living creatures, and we cannot prevent individual differences in fine wrinkles, colour, texture, gloss, etc., or subtle differences between parts.
Products that are not in our stock, but have been ordered by the customer. Sale-priced items. Products that have been in our stock for more than 7 days. Returns, exchanges and order cancellations for products that have been tried on outdoors cannot be accepted.
